Relationships with best-in-class manufacturers enable us to configure security systems with devices that are designed for a variety of hazardous areas. This includes IP cameras, access-control devices, door systems, motion sensors and network cabling. Cabling work reflects fire-resistive practices, from concrete seals to flame-barrier materials.

Food & Beverage

Energy & Utilities

Oil & Gas Refining
Interior and Exterior Areas

Questions about hazardous-location codes and standards (U.S., foreign, etc.) relative to security devices? Our teams can help. We value walk-throughs to understand precise needs. Contact us for a site visit or call 502-583-6000.


Overview: Hazardous-location Labels and Features

Based in Louisville, Kentucky, we distribute security devices and cabling designed to meet hazardous-area requirements, as these labels or designations indicate. This is informational only. It demonstrates how partnerships with elite manufacturers create wide-ranging options.

Network Cameras

Explosion-protected stainless steel housing

Numerous hazardous certifica-tions, including ATEX, IECEx, EAC EX and IA

UL: Class I, Division 1, Groups B, C, D, T4+ -50°C to +70°C (-58°F to +158°F), Class II, Division 1, Groups E, F, G, IP67, Class 1 Zone 1 A Ex d IIB + Hydrogen T4

Zones 1, 2, 21, 22; Groups IIC, IIIC

Class I/II/III

TPM, FIPs 140-2 level 2 certifica-tions

Data Cabling

Designed for extreme high/low temperatures

Flammability, fire resistance

Compliance with NEC, UL, ICEA, APAC and other directives, including European

Low smoke, zero halogen

Oil, sunlight resistance

Flammable-arrest designs for jackets / insulation

Flame tested

Chemical resistance

Security Door Controls

Magnetic Locks: Explosion proof epoxy sealed to eliminate sparks; 628 clear anodized aluminum housing; Classified for Class 1, Divi-sion 2 hazardous locations; No moving parts.

Exit Switches: Impact resistant non-metallic antistatic material; no moving parts; Corrosion proof with F1 UV protection; Silicone gas-ket on enclosure and actuator; Explosion protected contact blocks.

Class I, Zone 1, AEx de IIC T6…T4 Gb / Ex de IIC T6…T4 Gb X Zone 21, AEx tb IIC T85°C…T135°C Db IP66 / Ex tb IIC T85°C…T135°C Db IP66 X Class I, Division 2, Groups A, B, C, D Class II, Division 2, Groups E, F, G Class III UL50, 50E, 508, UL60079-0, -1, -7, -31 Type 3, 4, 4X, 12, 13

Pull Stations: UL listed for use in hazardous locations CLASS I, Group B, C, D; CLASS II, Group E, F, G; Class III; Type 4X outdoor

Motion Sensors

Explosion-proof / flame-proof, housing is NEMA 4X, water-proof rated enclosure designed as an IP66 housing.

Housing achieves UL Class I, Div. 1, Groups B, C, D; Class II, Div. 1 & 2, Groups E, F, G; and Class III